1" Pleated RV Shades - Night - Custom Sizes Available

Pleated Night Shades by United Shade provide total privacy when extended to the full down position. A variety of fabric types are available including Stitchbond and others.  This eliminates nearly all light infiltration. For those who desire maximum privacy, a blackout liner can be applied to the backside of the fabric, sold separately. Night Only shades are excellent in a variety of applications, including residential, RV, commercial and marine. 

Determine if the shade or blind will mount outside the window frame onto the wall (Outside Mount) or if the shade or blind will be mounted inside the window frame (Inside Mount).

1. Note: Most RV windows are Outside Mount.
2. Outside Mount — Measure the width (across) of the area to be covered. Example: End of frame to end of frame plus 2” added for additional coverage. Inside Mount: Measure the exact opening size. The factory will make any necessary adjustments from your exact measurements to allow for inside clearance and ease of operation.
3. Measure the length (drop) of area to be covered. Example: Top of frame to bottom of frame with an additional 2” for mounting above and below window.

United Shade will manufacture exactly the size you order. Take precautions with your measurements so entire window area is covered and allowances are made to assure a custom fit. If draperies or valances are already installed be sure your measurement for width allows the shade or blind to fit under the current window treatment.

Inside Mount Measuring Instructions

Inside mount shades and blinds are installed inside the window casing.

• Measure the exact inside width of the window casing from left to right inside edge.
• Measure the exact inside height of the window casing form top to bottom inside edge.
• Do NOT take any deductions. Allowances are made at the factory to ensure fit.

 BLINDS ARE ALL CUSTOM AND NON-RETURNABLE

IF YOU DON'T SEE THE SIZES YOU REQUIRE, CUSTOMS SIZES ARE AVAILABLE.  EITHER CALL 574-675-6919 OR EMAIL HELP@ELKHARTRVPARTS.COM WITH YOUR NEEDED SIZES.

Outside Mount Measuring Instructions

Outside mount shades and blinds are installed outside the window casing. The shade or blind will cover an area larger than the window itself.

• Measure the exact width to be covered. Allow enough extra coverage to ensure proper light control and privacy
• Measure the exact height to be covered. Allow for proper coverage.

 BLINDS ARE ALL CUSTOM AND NON-RETURNABLE

Blinds are shipped direct from the manufacturer - United Shade

INSTALLATION INSTRUCTIONS:

1. Install mounting brackets at top of window frame. Mount approximately 3″ in from the corner of the window. If you are using the Quick Install option, no brackets are necessary. Simply places screws directly through top rail into the predetermined holes. On shades 40” or wider use 3 mounting brackets, one in the center.
2. Install headrail into mounting brackets by tilting front of the headrail in up position. Slide the hook of the mounting brackets into groove of the headrail. Then, push back of the headrail up until it snaps into the bracket. Quick Install option will skip this step.
3. Allow the shade to hang down until the end of the cord retainer meets the bottom of the rail.
   Place the screw through the cord retainer and mount it directly below the bottom rail about ½” below the rail. This will create the proper tension to needed to properly operate the shade. The tension should be tight.
4. If needed, adjust the tension by pulling on the cord string and re-tie the cord retainer.

Style Choices	Manual – Pull Cord
Pleat Size Choices	1˝
Bottom Rail Option	Fingertip Lift Square Rail
Blackout Option 1	Stone for Night Shade
Blackout Option 2	Special quote needed/Total Block-Out
Header Rail Color Options	Yes
Length Range - 0" to 84"
Width Range - 0" to 92"